Seca mBCA 525 Скачать руководство пользователя страница 11

Страница: 11 / 194

Safety precautions • 11

English

-1

-3

-0

-2

3. SAFETY PRECAUTIONS

3.1 Safety precautions in these instructions for use

DANGER!

Used to identify an extremely hazardous situation. If you fail to take

note of this information, serious irreversible or fatal injuries will occur.

WARNING!

Used to identify an extremely hazardous situation. If you fail to take

note of this information, serious irreversible or fatal injuries may result.

CAUTION!

Used to identify a hazardous situation. If you fail to take note of this

information, minor to moderate injuries may result.

NOTICE!

Used to identify possible incorrect usage of the device. If you fail to

take note of this information, you may damage the device, or the

measuring results may be incorrect.

NOTE

Includes additional information about use of the device.

3.2 Basic safety precautions

Handling the device

►

Please take note of the information in these instructions for use.

►

Keep the instructions for use in a safe place. The instructions for use are a

component of the device and must be available at all times.

►

In the interest of patient safety, you and your patients are obliged to report

serious events that occur in connection with this product to the manufac

turer and the authority responsible in your country.

DANGER!

Risk of explosion

Do not use the device in an environment in which one of the following

gases has accumulated:

►

oxygen

►

flammable anesthetics

►

other flammable substances/air mixtures

➔

Safety precautions in these instructions for use

➔

Basic safety precautions

➔

Handling the device

➔

Handling a wheeled stand

➔

Preventing electric shock

➔

Prevent injuries and infections

➔

Preventing damage to device

➔

Handling measuring results

➔

Handling packaging material

➔

Handling batteries and rechargeable batteries

Содержание mBCA 525



































































































































































































Результаты поиска

Содержание mBCA 525

Отзывы:

Бренды по названию

Популярные бренды

Seca mBCA 525, Инструкция по эксплуатации

Результаты поиска

Содержание mBCA 525

Отзывы:

Бренды по названию

Популярные бренды