SEBSON SET_6_UNDER, Руководство пользователя

Страница: 4 / 14

4
44319 Dortmund
Germany
Mail: support@sebson.de
UST-IDNr.:DE246981805
WEEE-Reg.-Nr.: DE 78960174
Manual
Model: SET_6_UNDER
Thank you for choosing a product of SEBSON. Read the instructions carefully and keep them for looking up before
start-up this product. A long and failure-free operation can only be guaranteed if the installation and start-up is done
properly. Before starting up this product, please check for external damage. In case of visible external damage we
immediately dis-advise the start-up of this product! Please remove all packaging material of this product before the
first start-up an and check the content for completeness!
Intended use:
This lamp of the brand SEBSON can be mounted on different furniture like cupboards, shelves or even on the wall.
Scope of delivery:

6 LED Under Cabinet Light Bars

1 power plug (12V)

long connection cable (2 pieces)

short connection cable (5 pieces)

Screw holder for fixing (12 pieces)

Adhesive strip ( 12 pieces)

end caps (6 pieces)
General safety information:
Danger:
In case of damages or contact with water turn off this product immediately without tension and make sure
that a restart is no longer possible!
Danger of suffocation:
Keep this product away from children and animals! The packaging contains small parts
that can be swallowed!
Caution:
Set up the light beam of the light never directly at people or animals to prevent fire damage or eyes
damage and avoid looking directly into the light source!

The remodeling of this product is not allowed! The proper and safe functioning of the device can no longer
be guaranteed if it is modified! In addition, this will invalidate the warranty claim!

An exchange of the built-in luminous in the light is not possible.

Do not connect a dimmer as this may cause a damage to the lamp. As a result of a strong heat
development the LED can be damaged!

Do not cover the light with heat insulating materials! As a result of a strong heat development the LED can
be damaged!

The manufacture does not accept any responsibility for injuries or damage resulting from improper use of
this product!

Any other use than the description may result in damage to the product. So the dangers are such as
electric shock, short circuit, fire etc.

We reserve the right to make changes to the product, the packaging or the operating instructions as well as
printing errors.

Protect the product from external damage, heavy dirt, moisture and excessive heat!