8
OPERATING INSTRUCTIONS
Starting The Machine - Figures 1 & 2
Before turning on your vacuum cleaner, make sure that the vacuum handle is in
its upright locked position and that you have a firm hold on the handle grip to keep
the machine from moving forward.
1.
Turn the quick release cable hook (#15, figure 1) to the up position
by moving it to the left or right.
2.
Release the power cord plug from the power cord
and lift the cord off of the upper cord hook (#26, figure 2).
3.
With the switch (#2, figure 2) in the “O” (OFF) position, plug the
polarized power cord into a 120 volt outlet located near the floor.
Switch Position
O = OFF
I
= ON
Operating the Machine - Figure 3
When the machine is switched on with the handle in the upright locked position,
the power head and brush automatically rise from the carpet. To release the
machine from the upright locked position, press down on the foot pedal (19) and
lower the handle into the normal operating position. The power head and brush
will automatically lower to the appropriate height.
The handle can be lowered to an intermediate stop position in order to lift up the
brush head for maneuvering over rugs, etc. To lower the handle to a horizontal
position useful for vacuuming under beds, the foot pedal must be pressed a sec-
ond time. The intermediate stop position can be closed off by the orange-colored
slider (27) on the back of the swivel neck (20), so that the handle will go from ver-
tical to horizontal in one movement.
WARNING!
The quality, condition, coating, texture, age and manufacturing technique of all floor surfaces vary.
Therefore, upright vacuums with rotating brushes, including your SEBO, may damage some floor coverings or surfaces. Some
types of high-gloss hardwood floors, cushion vinyl, berber carpets, long shag, and delicate or hand-woven carpets are particu-
larly vulnerable to damage by rotating brushes. When possible, consult the materials supplied by your floor’s manufacturer for
information on proper upkeep and cleaning.
To ensure that your new SEBO vacuum cleaner is compatible with your floor,
please test the vacuum cleaner on each type of flooring surface in a small inconspicuous area to determine if any damage
occurs. If damage occurs, stop using the vacuum cleaner immediately!
The standard brush roller on your SEBO vacuum is appropriate for most types of floor surfaces. However, a soft-bristle brush
roller (X4 part # 5010GE or X5 part # 5290GE) that is designed for use on sensitive looped-pile carpets and/or hard floors is
available for an additional charge. As with the standard brush roller, you should test the machine using the soft-bristle brush
roller in an inconspicuous area prior to widespread use. The soft-bristle roller will wear more quickly than the standard brush
roller, so it will need to be replaced more often. Also, because the bristles are softer, the height adjustment on the machine
will be slightly lower than normal.
Care must be taken to ensure that the bottom of the machine does not contact the floor.
If this happens, damage to the floor could occur.
If damage occurs, stop using the vacuum cleaner immediately!
15
2
26
27
19
!
Figure 1
Figure 3
Figure 2
Содержание Automatic X4
Страница 1: ...OWNER S MANUAL For Household Use Only...
