8
To remove a brush or power head, switch off the power and unplug the
vacuum. Then, press the tool release button (9) and pull the tube out.
NOTE! C3.1 users with ET-C, ET-H, ET-1 or ET-2 power heads, please refer to your
power head user’s manual for more detailed instructions for operating and main-
taining your power head.
Premium Parquet nozzle - Figure 9
The parquet nozzle is specially designed for use on hard surfaces. The brush should be
cleaned regularly. Remove the parquet brush from the telescopic tube to clean. Fibers
and hair can be pulled out of the bristles manually, or vacuum the bristles with with the
telescopic tube. The brush strips are removable for cleaning and replacement.
Kombi nozzle - Figure 10
The Kombi nozzle is adjustable for carpet or hard floors. To set for carpet, slide the up
arrow button (37) to the right until it clicks into place. The hard floor dusting brush will
raise up allowing the head to move over the carpet. To set for hard floors, slide the down
arrow button (38) to the left until it clicks into place. The brush will lower to gently sweep
your floors.
The slider in Figure 10 is set in the position for carpet
. The brush should be
cleaned regularly. Remove the Kombi nozzle from the telescopic tube to clean. Fibers
and hair can be pulled out of the bristles manually, or vacuum the bristles with with the
telescopic tube. The brush strip is removable for cleaning and replacement.
Turbo head - Figure 11
The Turbo head has an air-driven rotating brush for gentle brushing of carpets. The
Turbo head can be adjusted for high and low pile carpet. To adjust the head for high
pile carpet, push the slider button (39) to the right. For low pile carpet, push the slid-
er button (39) to the left.
The slider in Figure 11 is set in the high pile position.
The
rotating brush should be cleaned regularly. Remove the Turbo head from the tele-
scopic tube to clean. Remove fibers and hair from the brush manually.
The telescopic tube (4) is useful for vacuuming corners and hard-to-reach areas. You
may use the telescopic tube without a brush, power head or attachment. To remove a
brush or power head, switch off the power and unplug the vacuum. Then, press the
tool release button (9) and pull the tube out. The standard attachments [the crevice
nozzle (23), upholstery nozzle (24) and dusting brush (25)] may be inserted onto the
end of the tube. It is not necessary to turn off the vacuum while switching the
stan-
dard
attachments (the crevice nozzle, upholstery nozzle or dusting brush). After use,
switch off the power, unplug the vacuum and remove attachment. Re-insert the
attachment tube into the power head or brush, turning the tube if needed, until you
hear it click into place.
NOTE! C3.1 users with ET-C, ET-H, ET-1 or ET-2 power heads, please refer to your
power head user’s manual for more detailed instructions for connecting your power
head.
To use the hose without the telescopic tube, switch off the power and unplug the vacu-
um. Push the handle release button (3) and pull the HANDLE out of the end of the tele-
scopic tube. Do not try to separate the hose from the handle! Insert an attachment tool,
if desired, onto the end of the handle. After use, switch off the power, unplug the vacu-
um, remove attachment. Re-insert the handle into the telescopic tube making sure it
is seated correctly and snap it into place.
Figure 7
Figure 8
33
9
Using the Telescopic Tube, Hose & Attachments - Figures 7 & 8
4
3
Figure 9
Figure 11
Figure 10
38
▲
▲
Always unplug vacuum from outlet before
dismantling any part of machine!
!
USE AND MAINTENANCE OF BRUSHES AND HEADS
37
39
▲
▲
▲
▲
Содержание AIRBELT C
Страница 1: ...10 OWNER S MANUAL For Household Use Only...
