EN
Put an eyepiece with the smallest possible enlargement, ie with
a large number (for example, 20mm), in the focuser. The
sharpness can be set on the side with the wheels.
Look through the telescope and place it on position on the top of
the tower.
Look through the viewfinder tube. If you do not see exactly the
same image, adjust the viewfinder tube. On the search tube you
will find small screws, which can be used to adjust the
viewfinder tube until the object can be seen exactly in the
viewfinder tube. Then you have aligned telescope and finder
telescope parallel to each other. If you encounter the viewfinder,
repeat the procedure.
The viewfinder should be set up before each observation.
How to use the moon filter?
The moon filter can be screwed by means of its
socket in the socket of the eyepieces. The moon filter
and the eyepiece, you can then use as usual in the
focuser. If you replace the eyepiece, you should also
screw the filter out and back in.
How to use a color filter?
Like the moon filter, the single color filter is screwed
into the eyepiece and then inserted into the eyepiece
output with the eyepiece.
