Sebart Mini Avanti 1.4m ARF, Инструкция по сборке

Страница: 4 / 6

Flaps:
We recommend to use flaps down for starts and landings to make them shorter and
easier.

Activate the FLAP function in your radio.

For start use approx. 20° flaps down and mix 8% elevator down

For landing use approx. 50° full flap down and mix 20% elevator down
Control throws:
 For the AILERON we recommend the following throws:
Use approx. 10% aileron differential (more up) for normal flight.
High rate: 30° left & right
Normal flight: D/R: 60% Expo: 10%
Snap, spin: D/R: 100% Expo: 40%
Start & landing: D/R: 100% Expo: 40%
 For the ELEVATOR we recommend the following throws:
High rate: 35° up & down
Normal flight: D/R: 50% Expo: 40%
Snap, spin: D/R: 100% Expo: 80%
Start & landing: D/R: 100% Expo: 80%
 For the RUDDER we recommend the following throws:
High rate: 35° left & right
Normal flight: D/R: 80% Expo: 20%
Snap, spin: D/R: 100% Expo: 60%
Start & landing: D/R: 100% Expo: 60%
Note: the Expo is (+) for JR systems, and (–) for Futaba systems.
Mixing:
We recommend the following mix (if you have a programmable computer radio):

Rudder →Elevator DOWN
full rudder to the right, the elevator have to go down (negative) approx. 4%
full rudder to the left, the elevator have to go down (negative) approx. 4%

Rudder →Ailerons
full rudder to the right, the ailerons have to go left approx. 7%
full rudder to the left, the ailerons have to go right approx. 7%