Rockland Bed Assembly Instructions, Rev 1. 121102
207 - 591 – 4215
Sebago Furniture
www.sebagofurniture.com
1. DO NOT CROSS THREAD the
BARREL BOLT.
2. Align the first attached rail with the
Header.
3. Tighten snuggly with the socket
wrench.
4. Repeat the above process of
securing the 1
st
rail to the Header.
5. Carefully with another person align
the second rail to the Footer and
Header. Press the alignment pins
into the Header and Footer. Have
a second person hold the Rail
while securing the Rail with the
bed bolts.
PLATFORM ASSEMBLY
1. Locate the Platform piece marked
“H” on one end and #1 on the other
end.
2. Place it with the handhold tightly
against the Header on top of the
small wood blocks.
3. Next locate the next platform piece
marked #1-2, place it on the rails
facing the header.
4. Insert the tongue into the groove. If
your bed is a King you will need to
attach the support foot to the piece
marked #1-2, go to
KING Foot
Assembly
Instructions below
before proceeding.
All manuals and user guides at all-guides.com
