−
The product does not have any type of isolating device for
the 230 Vac line. It will therefore be the responsibility of the
installer to arrange an isolating device inside the plant. It
must be positioned where it can be protected from accidental
closing, according to that prescribed in point 5.2.9 of EN
12453.
−
Wiring of the various electrical components outside of the
product must be carried out in compliance with that
prescribed in Standard EN 60204-1 and its amendments at
point 5.2.7 of EN 12453. Power supply and connection
cables must be fixed using the cable glands that can be
supplied as an optional.
−
Pay attention while making holes in the outside casing, when
passing cables for connection and power supply and
assembling the cable glands, that everything is installed in a
way that keeps IP protection characteristics of the panel
unchanged as much as possible.
−
Pay careful attention when fastening the cables so that they
are anchored in a manner that is stable.
−
The back casing is not equipped with suitable
predispositions for fixing to a wall (predisposition for holes for
fixing using anchors or holes for fixing using screws). Plan
and implement necessary solutions to achieve an installation
that does not alter the IP protection.
I
MPORTANT
FOR
THE
INSTALLER
- ATTENTION: keep this instruction manual and respect the
important safety prescriptions contained herein. The non
compliance with the prescriptions may cause damages and
serious accidents.
- The device must never be used by children or persons with
reduced physical-psychological abilities, unless supervised or
trained on the functioning and the use modalities.
- Frequently examine the system to detect any signs of
damaging. Do not use the device if a repair intervention is
necessary.
Attention
All operations which require the opening of the casing (cables
connection, programming, etc.) must be carried out by expert
personnel during installation. For any further operation which
requires the casing to be re-opened (re-programming, repair or
installation changes) contact the after-sales assistance.
SEAV S.r.l.
declares that the product:
BeLED 230VAC - BeLED 12-24V AC-DC
is in compliance with the specifications of Directives
EMC 2004/108/EC, LVD 2006/95/EC
.
2
Rev. 1.0 26/05/2010