Seat SOUND SYSTEM 2.0, Руководство пользователя

Страница: 14 / 44

13 Audio mode
Text information, known as radio text, can also be broadcast. It is possible
to adjust the display to show radio text
⇒
page 35. Radio text will then be
shown instead of the station name. Not all stations support radio text. The
individual radio station is responsible for the texts displayed.
RDS also allows automatic station tracking. This means that the unit always
switches to the frequency that offers the best reception of the current radio
station as the vehicle travels from one area to the next. It is possible to sup-
press automatic frequency changing (
ALTERNATIVE FREQUENCY

OFF

)
⇒
page 35.
On some units it is possible to switch off the RDS function for travel in areas
where RDS is not used
⇒
page 35.

Changing frequency band
Fig. 3 RADIO main menu: frequency bands displayed with memory levels.
The currently selected frequency band (FM or AM) is indicated above the
station display.
After you switch to Radio mode, the available frequency bands and memory
levels are displayed for roughly 5 seconds in the bottom line of the screen
⇒
fig. 3 . Then they are replaced by the station buttons for storing stations
(for information on station buttons see page 15).
● In Radio mode, briefly press the
RADIO
unit button to display the func-
tion buttons
FM1
,
FM2
,
AM1
and
AM2
⇒
fig. 3 .
● Press one of the
FM
or
AM
function buttons to switch to the FM or AM
frequency band
⇒
fig. 3 .
● Alternatively: Briefly press the
MEDIA
unit button as often as required to
switch between the function buttons at the bottom of the screen.

Changing stations
Fig. 4 Changing station using the rocker switch [

SEEK / ...

].
Fig. 5 Changing station using the rocker switch [

SEEK / ...

] with selection of stor-
ed stations only.
