26
Audio mode
An external audio source connected to it can only be played over the vehicle
speakers, but
cannot
be controlled via the radio system.
An external audio source connected to the socket is indicated by
AUX
in the
Media selection menu.
If
AUX
is not displayed,
AUX
must be activated in the SETUP menu
⇒
page 30.
Connecting an external audio source to the AUX IN multimedia socket
●
Lower the basic volume of the radio.
●
Connect an external audio source to the AUX-IN multimedia socket.
●
Begin playback of an external audio source.
●
In media mode, briefly press the
MEDIA
⇒
Fig. 1
unit button to display
the selection menu for available media sources
⇒
Fig. 19
.
●
Press the
AUX
function button.
The
output volume
of a connected external audio source should be adjusted
to that of the other audio sources.
Adjusting the output volume
If you need to increase the output volume for the external audio source, first
lower the base volume on the radio system
⇒
page 9.
If the sound from the external audio source is
too quiet
, if possible, in-
crease the
output volume
on the external audio source. If this is not suffi-
cient, set the
input volume
(
AUX VOL LEVEL
) in the system settings to
level 2
or
level 3
.
If the sound from the connected external audio source is
too loud or distor-
ted
, lower the
output volume
on the external audio source if possible. If this
is not sufficient, set
AUX VOL LEVEL
to
level 2
or
level 1
.
Note
If playback of the external audio source finishes or if the connector of the
AUX-IN multimedia socket is unplugged, the radio will remain in the
AUX
menu.
Note
Interference may be heard if the external audio source is powered from the
vehicle’s 12-volt socket.
Note
Please read and observe the external audio source manufacturer operating
manual.
Note
If the external audio source is connected and playing and you select anoth-
er audio source in the radio system the external audio source continues to
function in the background.
