Seat SOUND SYSTEM 1.0, Руководство пользователя, Страница: 93 / 124

NAV (navigation system) 92
Note
•
Once you have entered a city in the keyboard, you can confirm the entry
by pressing and holding down the control knob. When you have entered the
first few letters of a place name and can already see the place you wish to
select listed in the speller display, you can press the rotary pushbutton (long
press) to switch to the list of places.
•
Once they have been entered, you can store destinations in the directory
⇒
page 98 and then navigate to them again later, using the “Load from direc-
tory” function
⇒
page 99.
•
Navigation to the destination can be modified or cancelled
⇒
page 95.
Route plan (route with stopover)
In the route with stopover mode you can enter up to six inter-
mediate destinations and a final destination.
Fig. 99 Navigation system: Route planned
Fig. 100 Navigation: Positioning the route plan destinations
– Press the function button
⇒
page 8.
– Also press the corresponding Route function button and confirm
the Active route mode (route with stopovers) function to change
to route plan mode
⇒
fig. 99 .
– Select Add new destination .
– Select a country from the list by rotating and pressing the control
knob.
– Select Town/ZIP and enter the data using the speller.
– Select City centre to navigate to the centre of a selected location
or
– Select Street or Special destination to define the destination in
greater detail.
– Position the entered destination/stopover as desired by turning
and pressing the rotary pushbutton
⇒
fig. 100 .
– Enter further stopovers if desired.
NAV
Media System 1.0_EN.book Seite 92 Donnerstag, 10. September 2009 1:52 13