Seat SOUND SYSTEM 1.0 Скачать руководство пользователя страница 88 | Manualshive

Страница: 88 / 124

Seat SOUND SYSTEM 1.0 Скачать руководство пользователя страница 88

NAV (navigation system)

87

RADIO, CD/MP3

TEL (telephone)

Note

You can also start a route guidance in demo mode

page 107 for simulation

purposes.

Navigation system voice guidance

Route calculation is announced with a voice message. During this time, the
display will show a list of the selected route criteria options (

and the dash panel display will show an arrow. This arrow faces in the direc-
tion of the entered destination.

When route calculation is complete, guidance is given by spoken driving
instructions and symbols. The spoken navigation directions are given in good
time before a turn-off.

You can use the following options to repeat the last navigation voice
message:

•

Press the rotary pushbutton while in the

Nav-Info

menu.

•

Press the control button for

Nav-Info

if you are

not

already in the

Nav-Info

menu.

•

press the right thumbwheel on the multi-function steering wheel*

If the navigation CD is inserted in the CD player

page 25, the language in

which the navigation system voice guidance is given can be changed

Caution

If driving instructions run contrary to traffic laws, the traffic laws always take
precedence.

Note

•

You can adjust the volume of the voice guidance prompts as they are

being announced using the on/off button

page 11 on the navigation

control console or the right thumbwheel on the multi-function steering
wheel*

•

If the vehicle is in a location that cannot be read by the navigation system

(e.g. car park or garage), a voice message will inform you of such. The arrow
in the dash panel display faces in the direction of the entered destination.

•

In neighbouring countries, the instructions given are slightly different to

those of your country of origin, as the navigation CD for these countries only
contains the main roads.

Dynamic navigation

The dynamic navigation function calculates routes based on
the currently available TMC traffic messages.

If the dynamic navigation function

page 103 is activated and a TMC radio

station is set, the system constantly checks whether relevant TMC messages
are available for the selected route. If the navigation system then determines
that a TMC traffic message is relevant for the current route, the system will
automatically calculate a new route plan to the destination.

The navigation system receives and processes the traffic announcements
issued by certain channels (TMC) in addition to regular programming. The
reception of TMC traffic messages is free of charge in Germany.

Note

•

Please note that the TMC messages sent by the radio stations may not

always be complete and correct.

Media System 1.0_EN.book Seite 87 Donnerstag, 10. September 2009 1:52 13

«
...
86
87
88
89
90
...
»

Содержание SOUND SYSTEM 1.0





























































































































Отзывы:

Нет отзывов