Radio mode
18
Switching to traffic reports (TP function)*
The TP function is only valid for the European version.
When the TP (receive traffic reports) function is on, the car radio is able to
receive traffic reports in any operating mode.
The TP function can only be used on FM. If the radio is connected to AM, the
TP function automatically switches off.
Switching on the TP function
When the TP key is pressed, the display reads:
-
TP
: if the station selected broadcasts traffic reports.
-
(TP)
: if the station selected does not broadcast traffic reports.
Traffic messages are reproduced at a set minimum volume. The minimum
volume can be changed using the PROG menu. After the traffic message, the
radio returns to the previously selected station at the previous volume.
The playing of the CD or the CD6/Aux will be interrupted while the traffic
messages are broadcast.
While a traffic report is being broadcast, you can adjust the volume using the
main button.
Switching off the TP function
If the TP button is pressed while a traffic report is being broadcast, this traffic
report is switched off.
If the TP button is pressed when there is no traffic report, the function is
switched off.
MUTE button
The MUTE button is only valid for the American version
It allows you to mute the audio source to which you are listening:
Fig. 6 TP function
radio mp3 ingles.book Seite 18 Montag, 23. April 2007 3:40 15