Seat PLUS/NAVI SYSTEM, Руководство пользователя

Страница: 19 / 72

18 Audio mode
Browsing the fre-
quency band
quickly Place your finger on the slider in the frequency dial and
drag it along the dial.
Hiding the fre-
quency band Briefly press the function button
Manual
.
If you select a station with a stored station button, the
manual selection of the frequency is also finalised. If
you do not do anything else, after a certain time the fre-
quency band will close automatically.
Storing stations
Storing the sta-
tion that you are
listening to in
one of the stored
station buttons Hold down the desired stored station button
⇒
Fig. 12
until you hear the signal. The station that you are listen-
ing to will be stored in this button.
Storing a station
from the list of
stations in one of
the stored station
buttons Press the function button
Stations
⇒
Fig. 12 to open the
list of stations.
The stations already assigned to stored station buttons
are shown in the list of stations marked with the sym-
bol

⇒
Fig. 13 .
Select the desired station holding it down on the dis-
play until the screen for storing stations appears.
Press the stored station button where you wish to save
the station. A signal will sound and the station will then
be saved in this stored station button. The system auto-
matically returns to the list.
Deleting a stored
station In the menu
Delete presets
, available in the menu
Radio
setup you can delete the stored stations one by one or
all at once
⇒
page 20.

Scan function (SCAN)
When the scan function is running, all available stations on the current fre-
quency band are played in sequence for around 5 seconds each.
Starting the scan
function Briefly press the setup button.
OR: Press the function button
Setup
and then select
SCAN
.
Stopping the scan
function Press the function button
SCAN
“crossed out” to
stop the scan function on the station you are listen-
ing to.
OR: Briefly press the setup button.
The scan function also ends when you manually se-
lect a station using the stored station buttons, or
when a traffic report comes in.

Autostore (automatic station storing)
Hold the RADIO button down for approximately 10 seconds to carry out the
autostore function for the stations that can be tuned in at the time of run-
ning the Autostore. The stations are saved in the stored station buttons.
Note
This function can take several minutes, during which time the radio will re-
main muted. In addition, any stored stations assigned previously will be de-
leted.
