![Seat Mii 2020 Скачать руководство пользователя страница 136](http://html1.mh-extra.com/html/seat/mii-2020/mii-2020_owners-manual_1229331136.webp)
Driving
Brake energy recuperation
Fig. 134
On the selector lever: connect the
brake energy recuperation.
Fig. 135
On the instrument panel display: indi-
cation of recuperation levels.
The brake energy recuperation can generate
a braking effect. This braking effect depends
on the selected driving programme and the
level of charge of the high-voltage battery.
When braking the vehicle and when the vehi-
cle moves by inertia or travels downhill in the
deceleration phase, electric power is gener-
ated by the electric engine and stored in the
high-voltage battery. The electric engine
then operates as an alternator and produces
a engine brake effect. This process is called
brake energy recuperation.
The status of the recuperation is indicated in
the power display of the instrument panel
›››
. When recuperation is active, the
needle goes to the green area of the display.
The current recuperation level is displayed on
the instrument panel display
.
Given the case, in the application installed on
the smartphone you can view a statistic of
the energy recuperated over the last 30 mi-
nutes. Check the electronic instruction man-
ual of the application for this.
The effect of the engine brake is more or less
intense depending on the level of recupera-
tion. If the recuperation is very intense, the
brake light of the vehicle may also be switch-
ed on. As the charge level of the high-voltage
battery increases, the recuperation reduces
and, thus, the effect of the engine brake.
When the high-voltage battery is fully charg-
ed, no energy recuperation takes place and
the effect of the engine brake is not available.
When the vehicle detects that road condi-
tions do not allow safe contact between the
wheels and the road, the energy recupera-
tion is automatically reduced and, therefore,
the effect of the engine brake
.
Select a recuperation level
There are a total of 4 brake energy recupera-
tion levels. You can switch between recupera-
tion levels
1
to
3
by pressing the selector lever
slightly sideways towards
›››
+
and
–
:
●
Push the selector lever slightly to the
left
to
increase one recuperation level.
●
Push the selector lever slightly to the
right
to decrease one recuperation level.
●
Push the selector lever to the
right
for a
few
seconds
to disconnect the recuperation.
To increase to recuperation level
4
, push the
selector lever slightly to position
B.
. Pushing it
again gently in the direction of the arrow
, it
is changed back to position
D
and the last re-
cuperation level that was selected is activa-
ted.
Recuperation level
Fig. 135 and mean-
ing:
0
The vehicle moves by inertia. Recupera-
tion only takes place when braking.
1
Slight recuperation, recuperation level 1
2
Medium recuperation, recuperation lev-
el 2
134
Содержание Mii 2020
