RADIO
39
Note
If you are outside the transmission range for the stations saved in the list, you
will not be able to select them (the station names will be greyed out). You can
try to tune into stations with a weak reception signal using the tuning func-
tion
Tuning Menu
Manual tuning
With the manual tuning option, even weak stations can be set
and saved.
– Press the
Tuning
control button in the radio menu.
– Select
>>
(“Tune up”) or
<<
(“Tune down”) on the display by
rotating the control knob
– Press the control knob to set the desired station frequency.
Briefly pressing the control knob will change the frequency in small steps. If
you hold down the control knob, the frequency changes more rapidly. When
you release the control knob, the frequency adjustment stops.
If you have selected a radio station manually, you are shown the station even
after switching to the main radio menu.
If you have selected a weak station in the FM band, it does not continue to
appear on the station list as a selection after changing radio stations.
The control wheel functions always refer to the frequency band that is current
set.
Automatic seek mode
– Press the
Tuning
control button in the radio menu.
– Select
>|
(“next track”) or
|<
(“previous”) by rotating the control
knob
– Press the control knob to begin automatic tuning.
Fig. 39 Radio: Manual
tuning (forward)
Fig. 40 Radio: Automatic
seek mode forwards
media_systemE_EN.book Seite 39 Montag, 21. September 2009 1:48 13