Seat Media System E, Руководство пользователя

Страница: 120 / 167

Navigation (NAV)* 119
Operating RADIO, MEDIA (audiovisual
systems)
NAME, TEL NAV, INFO CAR, SETUP
– Enter a route plan
⇒
page 118, fig. 141 .
– Press the
Memory
control button.
– Select Store route .
– Use the keyboard to enter a name for the route you want to store.
– Select OK in the alphanumeric keyboard. The route plan you
entered will be stored.
You can store a destination and up to three stopovers in the route plan
⇒
page 106. You can then drive to these destinations in the order that you
set.
The route entered will be saved with the final destination and stopovers and
can be loaded again as a new destination
⇒
page 119.
You can edit the route plan at any time as necessary. To do so, select one of
the destinations and press the control knob. You can then select
Edit , Move ,
Delete or Drive to now as desired
⇒
page 119.
If you have selected Drive to now and do not wish to edit the route the system
will use the existing route plan and the current start position once you have
confirmed
Start route guidance .
If the option Store route is greyed out this indicates that the route memory is
full or that the mode Route without stopover is activated. Delete routes not
needed from the route memory
⇒
page 120. Or select the Route with
stopover function
⇒
page 120.
Note
You can store individual destinations to the directory
⇒
page 117.
Loading a route
– Press the
Memory
control button in the navigation menu.
– Select Load route
⇒
page 116, fig. 137 .
– Select the route you would like to load from the list.
– Select Start route guidance .
Route plans that have been stored
⇒
page 118 can be loaded again quickly
and conveniently.
You can change the route plan at any time. To do so, select one of the desti-
nations and press the control knob. You can then select
Edit , Move , Delete or
Drive to now as desired.
Modifying
To enter new information for the final destination or stopover.
Moving
To change the order of destinations in the route plan.
Deleting
To delete the selected final destination or stopover. If you delete the final
destination, a stopover will automatically be set as the new destination.
Driving to now
You can drive directly to the selected final destination or stopover.
If you do not want to edit the stored route, the route plan will be loaded upon
selecting
Start route guidance and the starting point will be the current posi-
tion of the vehicle.
media_systemE_EN.book Seite 119 Montag, 21. September 2009 1:48 13