Seat COMMUNICATION SYSTEM, Руководство пользователя, Страница: 7 / 26

Communication 5
Controls and equipment
Controls and equipment
Communication
Voice command mobile telephone installation
Introduction
This system allows the connection of a mobile phone and to
use this hands-free.
The hands-free device means that the telephone can be used inside the
vehicle; the driver will not have to remove their hands from the steering wheel
nor will they be distracted.
Note
•
The voice command function is only available in the following languages:
Spanish, German, English, French, Italian and Czech. Other languages (such
as Dutch or Portuguese) will have Spanish as the default language for voice
instructions, and the vehicle must be taken to an Authorised Service Centre
for the change to be made.
•
There are certain versions of mobile telephone software that contain
errors. These errors may give rise to faulty operation of the vehicle hands-free
system. In this case, consult the Technical Service of your mobile
telephone.
Basic functions
The voice command system can be activated by the “press to
talk” button, located on the multi-function steering wheel.
Talk button
The voice command system can be activated by the “press to talk” button,
located on the multi-function steering wheel
⇒
fig. 1 .
If one of these buttons is pressed while using the speech control system, the
function is cancelled.
After pushing the “Talk” button, wait some seconds for the sound signal
after which the vocal commands may be used. These commands may be used
Fig. 1 Talk button on the
multi-function steering
wheel


Sist Comunicacion_ing Seite 5 Dienstag, 13. März 2007 5:30 17