Seat Alhambra 2019, Руководство пользователя

Страница: 83 / 380

Instruments and warning/control lamps
Compass*
Fig. 80 Magnetic zones
The compass does not require calibration in
vehicles for which the navigation system was
mounted at the factory. The option
compass
disappears.
The compass in vehicles in which the naviga-
tion system was not mounted at the factory,
is permanently and automatically calibrated.
If electronic or metal accessories (mobile
phone, television) are subsequently mounted
in the vehicle, the compass should be recali-
brated manually.
Adjusting the magnetic zone
●
Switch the ignition on.
●
Select the
Settings
menu followed by the
option
Compass
and
Zone
.
●
Select the magnetic zone corresponding to
the position of the vehicle
›››
Fig. 80 .
●
Adjust and confirm the magnetic zone
(
1-15
).
Calibrating compass
To calibrate the compass you must be in one
of the valid magnetic zones with sufficient
space to be able to trace a circumference
with the vehicle.
●
Switch the ignition on.
●
Select the
Settings
menu followed by the
option
Compass
and
Calibrate
.
●
Confirm the message
Turn through a
full circle to calibrate the compass
with key

on the wiper lever or key

on the multifunction steering wheel and then
turn through a full circle at around 10 km/h (6
mph).
When the corresponding cardinal point is dis-
played, the calibration is complete.
Service intervals
The service interval indication is shown on the
instrument panel display.
SEAT distinguishes between services with en-
gine oil change (e.g. Oil change service) and
services
without engine oil change (e.g. In-
spection).
»
81