Seat Alhambra 2019, Руководство пользователя, Страница: 268 / 380

Driving
 The ACC is active.
No vehicle is detected in front. The programmed
speed remains constant.

If the symbol is white: the ACC is
active.
A vehicle in front has been detected. The ACC ad-
justs speed and distance from the vehicle in front.

If the symbol is grey: ACC is inac-
tive (Standby)
The system is switched on, but is not adjusting.
 The lamp lights up green
The ACC is active.
Some control and warning lamps will light up
briefly when the ignition is switched on to
check certain functions. They will switch off
after a few seconds.
WARNING
Observe the safety warnings
›››
in Con-
trol and warning lamps on page 86 .
Status display
Fig. 250 On the instrument panel display:

ACC inactive (Standby).

ACC active.
Indications on the display
›››
Fig. 250 :
Vehicle ahead detected. ACC is not ac-
tive and is not regulating your speed.
Distance from the vehicle ahead. ACC is
not active and is not regulating your dis-
tance.
Vehicle ahead detected. ACC is active
and is regulating your speed.
1
2
3
Distance level 2 set by the driver.
ACC is active and is regulating your dis-
tance based on speed.
Speed programmed with the ACC
Note
When the ACC is connected, the indica-
tions on the instrument panel screen may
be concealed by warnings from other func-
tions, such as an incoming call.
Radar sensors
Fig. 251
On the front behind the SEAT badge:
radar sensors.
A radar sensor is fitted on the front, behind
the SEAT badge
›››
Fig. 251 .
The radar sensor's visibility may be impaired
by dirt, or by environmental influences such
as rain or mist. In this case the adaptive cruise
4
5
6
266