SeasonsComfort ERH185, Руководство пользователя

Страница: 2 / 4

plug. Contact a qualified electrician to replace loose
or worn outlet.
17. The output of this heater may vary and its temperature
may become intense enough to burn exposed skin.
Use of this is not recommended for persons with
reduced sensitivity to heat or an inability to react to
avoid burns.
SAVE THESE INSTRUCTIONS
PLEASE READ BEFORE OPERATING
OPERATING INSTRUCTIONS:
PRE-OPERATION INSTRUCTIONS:
• Carefully remove your heater from the box (please
save carton for off-season storage).
• Make sure the unit is in the OFF position before plugging
the heater into the outlet.
• Place heater on a firm level surface.
OPERATING INSTRUCTIONS:
• Plug the power cord into a wall outlet(110-120V
AC,60Hz).
• When the unit is plugged into a electric outlet, the
power indicator light will illuminate to tell you that the
heater is functioning.
• Rotate the thermostat knob clockwise to high position.
• Slowly turn thermostat knob counter clockwise until the
heater shuts off. The heater will automatically maintain
this temperature. For a lower temperature, rotate the
knob further counter clockwise. For a higher
temperature, rotate the knob clockwise. Room
temperature is regulated by adjusting the thermostat to
a desired position.
• The unit will operate until the desired temperature has
been reached, after which the unit will turn on and off
to maintain your desired temperature setting.
• 1320 Watt setting provides maximum level heating.
THERMOSTAT INSTRUCTION:
• Turn the thermostat knob clockwise to the full HIGH
position. When the room has reached the desired
temperature or comfort level, carefully turn the
thermostat counterclockwise until the heater turns off.
The heater will cycle on and off to maintain that
temperature.
• Room temperature is regulated by adjusting the
thermostat to a desired position.
• The unit will operate until the desired temperature has
been reached. After which the unit will turn on and off
to maintain your desired temperature setting.
• Turning the knob clockwise will increase the
temperature setting.
SAFTEY FEATURES:
AUTOMATIC TIP-OVER SAFETY SWITCH:
The Tip-over safety switch is located inside the cabinet housing.
The tip-over safety switch allows the unit to operate only when
the heater is placed on a level surface. If the heater is tipped
or tilted while in operation, it will automatically shut off.
AUTOMATIC OVERHEAT SAFETY CONTROL DEVICE:
This heater is equipped with a patented, technologically-
advanced safety internal heat limiting thermostat and
overheat protection circuit. When a potential overheat
temperature is reached, the system will automatically shut the
heater off and turn the alert light on.
ALERT INDICATOR LIGHT:
The alert light will turn on when the heater internal temperature
rises to an unsafe level. If this situation occurs, make sure
heater is on a level surface and clear of all obstructions.
Unplug heater and allow it to “cool down” before restarting.
SERVICE INSTRUCTIONS:
• Do NOT attempt to repair or adjust any electrical or
mechanical functions on this unit.