Page 2
2
ATTACH STRETCHERS TO LEG
ASSEMBLIES
Attach
Upper
Stretchers
and
Stretcher Assem-
bly to Leg As-
semblies using
(8) 80mm Hex
Lags as shown. Plug lower holes only
with 5/8” Bungs using Rubber Mallet.
Align
predrilled
holes in Legs with
holes in Aluminum
Support Braces as
shown. Secure using
(6) 50mm Hex Lags.
Attach
Upper
Stretchers to Ta-
ble top using (16)
1-3/4”
Phillips
Head Screws.
3
ATTACH ALUMINUM SUPPORT
BRACES TO LEG ASSEMBLIES
5
ATTACH BASE ASSEMBLY TO
TABLE TOP ASSEMBLY
Secure Upper and Lower Stretchers using (8)
1-3/4” Phillips Head Screws through pock-
ets in bottom of Stretchers into Legs.
ATTACH REAR STRETCHER
TO REAR LEGS
6
SECURE STRETCHERS
Flip over Base
assembly on
to Table Top
A s s e m b l y .
Secure Alumi-
num Support Braces to Table top using
(16) 3/4” Phillips Pan Head Screws.
4
ATTACH BASE ASSEMBLY TO
TABLE TOP ASSEMBLY
