- 6 -
d. The side spacers can
easily be taken off by
hand without any tool.
e. Do not use the side spacers which hold the
iPhone too tight as they may damage the
phone. If too tight, replace them with smaller
spacers.
f. SS-i: Front spacers and side spacers may also
be used for customizing Seashell housing to
other compatible iPhone models.
2.3. Waterproof test for Seashell
a. Close the Seashell housing without an iPhone
inside and lock securely.
b. Submerse the Seashell
housing into water to a
minimum depth of 10 inches
(200mm) for at least 5
minutes.
20cm
c. Remove the housing from the water. Check if
there is any water inside the housing. If not, the
housing is leak proof.
d. Dry the Seashell housing with cloth or paper
towel completely.
e. Open the Seashell housing by lifting the sliding
knob at the lock.
f. Use tissue paper to adsorb, but mot to wipe the
residue water at the edge of the housing
g. Refer to the section in this manual for O-ring
maintenance if leak presents.
h. Contact Zear Corporation Ltd Customer
service at [email protected] if you need
assistance.
