manualshive.com logo in svg

Sears CRAFTSMAN 944.604840, Руководство пользователя, Страница: 44 / 57

Поделиться
Скачать
Sears CRAFTSMAN 944.604840 Скачать руководство пользователя страница 44

43

REPAIR PARTS

TRACTOR - - MODEL NUMBER 944.604840

MOWER DECK

KEY    PART             
NO.     NO.                DESCRIPTION

KEY    PART             
NO.     NO.                DESCRIPTION

NOTE:

 

 

All component dimensions given in U.S. inches

             1 inch = 25.4 mm

56       165723           Spacer, Retainer
59       141043           Guard, TUV Idler
67       184939           Knob 
68       144959           V-Belt
92       STD541437   Nut
101     136420           Cover Mulching
102     71081010       Screw
103     19061216       Washer
104     10071000       Washer Lock
105     160793           Latch Asm.
106     2029J             Nut Weld
111     179292           Bracket Wheel Guage LH
112     179293           Bracket Wheel Guage RH
113     17000510       Bolt
116     4894H            Bolt
117     165746           Wheel Gauge
118     73930600       Nut
119     19121414       Washer
129     19131312       Washer 13/32 x 13/16 x 12 Ga.
130     STD523710   Bolt, Fin Hex 3/8-16 unc x 1 Gr. 5
131     STD533710   Bolt, Rdhd Sqnk 3/8-16 unc x 1
142     165890           Arm Spring Brake Mower
143     157109           Bracket Arm Idler 42”
144     158634           Keeper Belt 42” Clutch Cable
145     165888           Pulley Idler Flat
146     171977           Bolt Carriage Idler
147     131335           Spring Extension
148     169022           Spring Return Idler
149     165898           Retainer Spring Yellow Zinc
150     19091210       Washer  9/32 x 3/4 x 10 Ga.
152     169676           Cable Clutch 42 In
158     17720408       Screw Hex Thd Cut 1/4-20 x 1/2
159     72140614       Bolt Rdhd Sqn 3/8-16 unc x 1-3/4
184     19131410       Washer 13/32 x 7/8 x 10 Ga.
185     188234           Head Asm Cable Clutch
- -        130794           Mandrel Assembly (Includes Hous-

ing, Shaft and shaft Hardware Only-
Pulley not included)

- -        169583           Replacement Mower, Complete 
                                 (Std. Deck - Order separately 

mulcher cover and gauge wheel 
components key nos. 101-106, 116-
119)

1         165892           Mower Deck Assembly, 42”
2         STD533107   Bolt RDHD SQNK 
                                 5/16-18 unc x 3/4
3         138017           Bracket Assembly,Sway Bar, Front
4         165460           Bracket Sway Bar 38/42” Deck
5         STD624008   Retainer Spring
6         178024           Bar, Sway Deck
8         850857           Bolt, Hex  3/8-24 x 1.25 Gr. 8
9         STD551137   Washer, Lock
10       140296           Washer, Hardened
                                 (The following blades are available)
11       134149           Blade, 42" Mulching  Std (For 

mulching mowers only)

- -        139775           Blade, 42" Mulching Premium (For 

better wear when mulching)

- -        138971           Blade, 42" Hi-Lift (For bagging or 

discharging)

13       137645           Shaft Asm. w/Lower Bearing
14       128774           Housing, Mandrel, Vented
15       110485X        Bearing, Ball, Mandrel
16       174493           Stripper, Vented Mower Deck
18       72140505       Bolt, Carriage  5/16-18 x 5/8
19       132827           Bolt, Shoulder
20       159770           Baffl e, Vortex
21       STD541431   Nut Crownlock 5/16-18 unc
23       177563           Bracket, Defl ector
24       105304X        Cap, Sleeve
25       123713X        Spring, Torsion, Defl ector
26       110452X        Nut, Push
27       130968X428  Shield, Defl ector
28       19111016       Washer  11/32 x 5/8 x 16 Ga. 
29       131491           Rod, Hinge
30       173984           Screw Thdrol DOD PT Hex
31       187690           Washer, Spacer
32       153535           Pulley, Mandrel
33       178342           Nut, Toplock, Flanged
34       STD533717   Bolt RDHD 3/8-16 x 1-1/2
36       131494           Pulley, Idler, Flat
40       73900600       Nut Lock 3/8-16 unc
44       140088           Guard, Mandrel, L.H.
45       STD624003   Retainer
46       137729           Screw, Thd. Roll  1/4-20 x 5/8
48       133944           Washer, Hardened
52       139888           Bolt, Shoulder  5/16-18 unc
53       184907           Arm Assembly, Pad, Brake
54       178515           Washer, Hardened
55       155046           Arm, Idler

Содержание CRAFTSMAN 944.604840


























































Отзывы:

Нет отзывов