background image

SAFETY INSTRUCTIONS

3

To avoid crushing and related injuries:

• NEVER work on, under or around a load

supported only by a jack.

• ALWAYS use appropriately rated jack

stands.

WARNING

!

• L e e r ,   c o m p r e n d e r ,   y   s e g u i r   l a s

instrucciónes antes de utilizar el aparato.

• El manual de instrucciónes y la

información de seguridad deben estar
comunicado en lengua del operador
antes del uso.

• No seguir estas indicaciónes puede

causar daños personales o materiales.

ADVERTENCIA

!

• Study, understand, and follow all

instructions provided with and on this
device before use.

• Do not exceed rated capacity.
• Use only on hard, level surfaces.
• Lifting device only.
• Immediately after lifting, support the

vehicle with appropriately rated jack
stands.

• Do not move or dolly the vehicle while

on the jack.

• Failure to heed these markings may

result in personal injury and/or property
damage.

WARNING

!

! SAFETY MESSAGE !

Be sure all tools and personnel are clear
before lowering load. No alterations shall
be made to this device. Only attachments
a n d / o r   a d a p t e r s   s u p p l i e d   b y   t h e
manufacturer shall be used. Lift only on
areas of the vehicle as specified by the
vehicle manufacturer.

NOTE: 

Jack stands are rated per pair

unless otherwise noted.
Use 1 matched pair per vehicle only.

Содержание Companion 50181









Отзывы: