Sears 721.80513, Руководство по установке

Страница: 18 / 20

ENGLISH
18
STEP 6:
ATTACH THE OVEN TO THE WALL
damper
duct
power
supply
cord
clamp
5. Roof vented installation: See Figure 32 .
Install ductwork through the vent opening in the
upper cabinet. Complete the venting system through
the roof according to the method needed. See
“PREPARE THE VENTING SYSTEM,” STEP 2 on
the page 8. Use caulking to seal exterior roof
opening around the exhaust cap. See
Figure 6 on
page 8.
6. Use power supply cord clamp to bundle the power
supply cord. Install the power supply cord clamp,
using a screw as shown in
Figure 33 , to inside of
the cabinet.
7. To install the grease filter: Slide it into the slide slot,
then push up and toward oven center to lock.
See
Figure 34 .
8. Plug in the power supply cord.
9. Read your Owner’s Manual, then check the
operation of your microwave oven.
Figure 32
Figure 33
Figure 34