Sears 721.67902600, Руководство пользователя

Страница: 17 / 39

H. THE TURNTABLE MOTOR
REMOVAL
1) Remove the turntable and rotating ring.
2) Lay the unit on its back.
3) Remove the turntable motor cover.
The turntable base cover can be easily removed by
pinching the six tabs with wire cutters.
4) Disconnect the lead wire from the turntable motor
terminals.
5) Remove the screws securing the turntable motor to
the oven cavity assembly.
6) After repairing the motor, rotate the removed
turntable motor cover 180° and place the tabs in
the lower slots. Secure the cover with the screws
provided.
7) Fit the turntable motor cover’s projecting part to the
base plate slit.
8) The taptite screw shall be used when a turntable
motor cover is secured with a screw.
NOTE:
1. Remove the lead from the turntable motor VERY
CAREFULLY.
2. Be sure to grasp the connector, not the wires, when
removing.
I. HIGH VOLTAGE TRANSFORMER
REMOVAL
1) Discharge the high voltage capacitor.
2) Disconnect the leadwire from magnetron, and high
voltage capacitor.
3) Remove the screws holding the high voltage
transformer to the baseplate.
J. FAN MOTOR ASSEMBLY / REMOVAL
1) Discharge the high voltage capacitor.
2) Disconnect the leadwires from fan motor, fuse
holder, and high voltage capacitor.
3) Remove the two screws holding the suction guide
assembly to the oven cavity and remove the high
voltage diode ground screw.
4) Remove the two screws holding the fan motor
assembly to the suction guide assembly.
K. HIGH VOLTAGE CAPACITOR AND
DIODE REMOVAL
1) Discharge the high voltage capacitor.
2) Disconnect the leadwires from fan motor, fuse holder,
and high voltage capacitor.
3) Remove the screw holding the suction guide
assembly to the oven cavity and remove the high
voltage diode ground screw.
4) Remove the screw holding the high voltage capacitor
bracket.
5-6
Wire
Leads
Turntable
Motor
Taptite Screw
H.V.
Transformer
Suction
Guide
Noise Filter
Fuse
H.V.
Capacitor
Fan Motor
Assembly
H.V Diode
H.V.C
Bracket