Shenzhen Seaory Technology Co., Ltd.
01
www.seaory.com
2
Exellent quality, Perfect service
1. Introduction to Product Components
1.1 Front-end View
1.2 Back-end View
Ethernet interface: RJ45 interface, TCP/IP protocol, the network connection
between the PC and the printer can be realized through this interface
USB interface: USB-B type interface, directly connected to the PC.
Power interface: connect to AC power 100-240VAC, 50/60Hz, 4A.
Power switch: turn on and off the card printer circuit.
Back-end output card slot: The printed card is ejected from here, supslot
manual feeding card on back-end and recycling pending card.
2.3 Front-end View
Front-end input slot: The printer defaults to the input slot at the factory, and it
can also be set as the output slot.
Cleaning module door: Open this door to install the cleaning module.
Quick Use Guide
Self-service Kiosk Retransfer Dual-sided Card Printer
Model: Seaory R600M
Ethernet interface
Power switch
USB interface
Power switch
Back-end output card slot
Flattening modular door switch
Ribbon door
Back-end output card slot
Read before use: This manual only briefly describes the
basic installation and use. If you need to know more
about the use, installation and functional characteristics
of this product or have other questions, please refer to
the product manual of the corresponding model.
Ribbon door pull ring
Clean module door
Front-end input slot
