Seanix Kootenay Скачать руководство пользователя страница 11

11

An external coin-cell battery powers the real-time clock and CMOS content. When the
computer is not plugged into a wall socket, the battery has an estimated life of three
years. When the computer is plugged in, the 3.3 V standby current from the power
supply extends the life of the battery.

Super I/O Controller

The SMC 37C672 is an ISA Plug and Play compatible multifunction I/O device that
provides the following features:

 

Two Serial Ports with high speed 16C550 compatible enhanced UARTs.

 

Multimode bidirectional parallel port

 

Floppy disk controller.

 

Keyboard and mouse controller.

 

Supports an IrDA and Consumer IR-compliant infrared interface.

By default, the I/O controller interfaces are automatically configured during boot up. The
I/O controller can also be manually configured in the Setup program.

Serial Ports

Two 9-pin D-Sub serial port connectors are located on the back panel and are
compatible with 16450 and 16550A UARTs.

Parallel Ports

The connector for the multimode bidirectional parallel port is a 25-pin D-Sub connector
located on the back panel.  In the Setup program, the parallel port can be configured for
the following:

 

Compatible (standard mode).

 

Bidirectional (PS/2 compatible).

 

Extended Parallel Port (EPP).

 

Enhanced Capabilities Port (ECP).

Floppy disk Controller

In the Setup program, the floppy interface can be configured for the following floppy
drive capacities and sizes:

 

360 KB, 5.25-inch

 

1.2 MBYTES, 5.25-inch

 

720 KB, 3.5-inch

 

1.44 MBYTES, 3.5-inch

 

2.88 MBYTES, 3.5-inch

Содержание Kootenay





















































Отзывы: