6 |
P a g e
E.
Portable Outboard Cowling Cover with Carrying Handle
All specs follow the Standard Type Cowling Cover and we add 2 bottom tie up straps with cross-over webbing fully
reinforce the entire cover so it will be strong enough to support 3 soft handles located at both sides and top.
Easier to carry your motor and safer to setup.
With this motor cover on, it will give you 3 extra handles on top of
motor so you can much easily handle the motor in any position during transporting or boat setup. With the cover on,
your motor head cowling is protected from serious damage or scratches in the paint.
We developed this line only for portable outboard motors up to 30HP. Detail size check list is as below
Size A with Handle
–
Max Girth 46
”
& Height 13
”
Suitable Range 2.5-5HP
Size B with Handle
–
Max Girth 54
”
& Height 15
”
Suitable Range 6-9.8HP
Size C with Handle
–
Max Girth 62
”
& Height 17
”
Suitable Range 9.9-20HP
Size D with Handle
–
Max Girth 70
”
& Height 20
”
Suitable Range 25-30HP
Our Warranty
- Fabric structure is covered by a 2-years limited warranty on all items using the Seamax Sunlitec material, and a
1-year limited warranty on sewing lines, tie down strings, zipper line and plastic parts. Physical damage or lack of maintenance
damage is not covered under this warranty. Normal wear and tear are not covered under this warranty.
Shipping Cost Coverage -
We will pay for the 2 ways shipping within 30 days of purchase if the purchased
item(s) have manufacture defects. We will pay for 1-way shipping cost when within 30-90 days for manufacture defects.
If you order a wrong size by mistake, you can send it back within 60 days of purchase, additional shipping cost may be
applied. There is a restocking fee applied if item in used condition return within 30 days of purchase.
Manufactured & Distributed by: Seamax Marine and Outdoor
Address: 120-11791 Machrina Way, Richmond, BC, Canada V7A 4V3
Toll free: 1-877-907-7766 Tel: 604-277-7766 Fax: 604-277-3360
