13
Tie Strap Installation for Split Adjustable Base Systems
N O T E :
While using a split system, it is important to
adhere to the following installation instructions.
Proper use of the included tie straps will securely
hold split King adjustable bases together.
I N S T A L L A T I O N I N S T R U C T I O N S
F O R A D J U S T A B L E B A S E T I E S T R A P S
WARNING:
For safety reasons, it is recommended
that two people perform installation.
N O T E :
One (1) looped strap is included with each split
King adjustable base .
S T E P 1
Complete the installation of two bases
side-by-side according to the Complete
Reference Guide provided with your foundation.
It is recommended that the gap between bases
be no more than 25mm.
S T E P 2
Locate the two (2) looped straps (one (1) included
with each split King base).
S T E P 3
Start with one (1) strap at either the head or foot
of the bed. While one installer carefully lifts the
right side of the base, the other installer slips both
the elastic and strap loops around the suspended
right leg of the base. Carefully lower the base.
N O T E :
The elastic loop must be at top of strap
when fitted around leg.
S T E P 4
While one installer carefully lifts the left side of
the base, the other installer slips the other side of
the elastic and strap around the suspended left
leg of the base. Carefully lower the base.
S T E P 4
While one installer carefully lifts the left side of
the base, the other installer slips the other side of
the elastic and strap around the suspended left
leg of the base. Carefully lower the base.
S T E P 5
With the elastic loop above the strap, slide both
as high as they will go to the top of each leg.
Place the elastic loop up and over the notch at
the top of the leg.
N O T E :
Elastic loop should be touching leg of base
(not wrapped on top of strap).
S T E P 6
Repeat steps 3-5 to install second strap at the
other end of the bed.
