Sealy Posturematic Adjustable Base Inspire, Руководство пользователя

Страница: 8 / 20

8
STEP 1: SETTING UP YOUR ADJUSTABLE
BASE
Lift the adjustable base out of the shipping carton
carefully, and place it on a flat floor with the top side
facing downward.
Remove all accessory boxes and cut the orange ties
from inside the frame.
SEPARATING SECTIONS OF A QUEEN BED
If needed, the Queen beds can be separated into two
pieces for ease and convenience when moving them or
manoeuvering them around corners.
Locate the two (2) center connection brackets that
connect the head and foot sections of the adjustable
base.
Using a wrench, remove the screw and nut holding the
brackets in place by turning them counter-clockwise.
Remove the brackets to separate the head and foot
sections of the bed.
To reconnect both sections, align the bars and frames
properly, and then place the brackets back over the bars,
Make sure to line them up with the pre-drilled holes.
Insert the screw through the holes and then thread the
nut at the end of the screw. Tighten using a wrench.
Installation Guide
NOTE:
For safety reasons, lifting of the adjustable base
must always be performed by two (2) people; and
the unit should always be placed on a flat surface
before opening.