manualshive.com logo in svg

Sealweld Hydraulic Hand Pump, Руководство пользователя

Поделиться
Скачать
Sealweld Hydraulic Hand Pump Скачать руководство пользователя страница 4

 

Hydraulic Hand Pump 

Introduction  

  Page 1 

Introduction 

Hydraulic Hand Pump 

The Hydraulic Hand Pump is a hand-held hydraulic sealant injection pump that is rated to 10,000 PSI and 
operates in any position. It is very portable making it easy to keep one in your pickup for quick top-ups and 
emergency sealing jobs between regular maintenance intervals. It is perfect for pumping small quantities of 
cleaners, sealants and lubricants into valves. 

Features include: 

 

Locking handle to prevent damage to the pump 

 

Easy to handle, very portable 

 

Self-priming hydraulic action makes manual injection simple 

 

Generates up to 10,000 PSI when required 

 

Easily reloads with cartridge, bag or stick type products 

 

Discharges one (1) ounce of product easily with every fifty (50) strokes 

 

Easy to read high pressure gauge 

 

Buttonhead coupler quickly attaches to and releases from fittings 

 

The Hydraulic Hand Pump ships with an eighteen (18) inch long hose, Giant Buttonhead Coupler #17G and 
15,000 PSI Gauge with Guard #17B. It is ready to load and use right out of the box.  The working principle is 
simple; as the Handle #10 is stroked hydraulic fluid pushes the Piston Assembly #2 in the Sealant Barrel #3 
forcing product out through the High-pressure Hose Assembly #17.  Continue stroking the Handle #10 and 
pressure will continue to increase. 

Once the valve line pressure is exceeded product will begin to flow into the valve.  When a sufficient quantity of 
product has been injected the Hydraulic Hand Pump may be removed by opening the By-Pass Valve #7 then 
slipping off the Giant Buttonhead Coupler #17G from the buttonhead fitting. 

 

 

 

R

EAD THIS MANUAL THOROUGHLY 

BEFORE

 OPERATING

  

 

 

Refer to the “Parts Illustration” on page twenty-nine (29) for all references to part numbers in this 

manual. 

 

Содержание Hydraulic Hand Pump










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды