Latest products and information available at www.sealite.com
8
TRIDENT-1400
1400mm dia. Navigation Buoy
Assembly Instructions
Check Components
Unpack all components from container. Inspect all components for damage. Please alert Sealite if any
component is missing or damaged.
Assembly Instructions
Step 1
Position one of the float halves on its curved face on a firm flat surface. Chock each side of the float to
prevent it from rolling.
Step 2
Position the mooring post in the three large grooves along the length of the float. The flat end of the
float half should be at the base end of the mooring post. (The shallow tapered end will rest under the
mooring post deck plate).
Secure the float halves together using 8xM12 Bolts, nuts and washers. With each connection place
a flat washer on the bolt before sliding it through the hole in the float section, then fit a second flat
washer and a spring washer on to the bolt before securing with a nut.
Please coat each bolt in Anti-seize or molybdenum disulphide grease before fitting nuts.
Figure 3.
Figure 4.
Figure 5.
