manualshive.com logo in svg

Sealite SLC500, Инструкция по установке и обслуживанию

Поделиться
Скачать
Sealite SLC500 Скачать руководство пользователя страница 35

Latest products and information available at www.sealite.com

35

SL-C500 & SL-C600 

Solar Marine Lanterns

Problem

Remedy

Unable to communicate with 

lantern via USB

1. Connect the USB drive provided by Sealite to the PC and open 

to view files.

2. Double-click on the file: ???Configx.xx.exe (note, version 

number may vary)

3. Extract the executable file

4. Connect the lantern to a power source

5. Connect the lantern to the PC 

6. Click “COM Setup” 

7. Select the appropriate COM Port from the drop down menu in 

the “Serial Port” dialogue box

8. Ensure the “Open Port” check box is selected and “Port is Open” 

is displayed

9. Click “Ok”

10.Lantern should be connected and ready for programming

Lantern will not activate.

•  Ensure lantern is in darkness
•  Wait at least 60 seconds for the program to initialise in darkness
•  Ensure battery terminals are properly connected
•  Ensure lantern is connected to a 12volt power supply

Flash Codes will not change.

•  Turn rotary switches several times to ensure contacts are clear.

Programming settings will not 

change

•  Check programming cable is properly connected to both lantern 

and computer, and check that the lantern is connected correctly 

to a power source (and that the power source is charged eg. 

battery)

Trouble Shooting

Содержание SLC500













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды