Latest products and information available at www.sealite.com
8
POSEIDON-1750 Ocean Buoy
Assembly Instructions
Check Components
• Unload all components from crate or container.
• Check all components are complete and correct.
• Position the POSEIDON Float Section (1) on flat level ground.
Prepare Tower Section
•
Optional:
Position the Lantern on the Tower section. For details on Lantern see Lantern
Installation Manual.
Note:
Check for correct Lantern operation before fitting to the tower section.
•
Optional:
Position the Day Mark to the Mounting Plate and secure using 4 x M10 Socket Head
Cap Screws, washers and Nuts.
Connect Tower & Mid Sections
• Position the POSEIDON Tower (3) on top of the Hand Rail (8) and Mid Section (2).
o Secure the Tower to the Mid Section.
- If Tower Section is fitted with Solar Panels, it will require 14 x M10 Stainless Steel
Bolts, Nuts and Washers.
- If Tower Section is not fitted with Solar Panels then 18 x M10 Stainless Steel
Bolts, Nuts and Washers are required.
o Place a flat washer onto the bolt
o Insert bolt into hole through Tower and Float Section
o Secure a second Flat Washer, a Spring Washer and a Nut on to the Bolt
o Tighten the Nut
Connect Tower/Mid Section to Float Section
• Position the POSEIDON Tower and Mid Section Assembly to the Float Section (1)
o Secure the Tower and Mid Section assembly to the Float Section using 16 x M10
Stainless Steel Bolts, Nuts and Washers are required.
o Place a flat washer onto the bolt
o Insert bolt into hole through Tower and Float Section
o Secure a second Flat Washer, a Spring Washer and a Nut on to the Bolt
o Tighten the Nut
• Fit 2 x Ø25mm Shackles to the Lifting Eyes on the Float Section.
• Lift Buoy up to access the Lug Bushes at the base of the Buoy.
• The buoy is now ready for the Mooring Assembly to be fitted.
