39
Replacing the O-ring
Replace the O-ring if damaged or at least once per year. Only
use approved SeaLife O-ring - Item # SL33008. One spare O-ring
is included. Additional O-rings may be purchased at your local
authorized SeaLife dealer, or online at www.sealifepartsdirect.com
(USA Only).
To Remove O-ring:
1) Open the waterproof door. Refer to page 9 for instructions
on opening and closing the waterproof door.
2) Use the end of the Cleaning Brush / Tool or the side of a
credit card to lift the O-ring out of its groove.
To Install O-ring:
1) Make sure O-ring, O-ring groove and O-ring contact surfaces
are perfectly clean and undamaged for installing the O-ring.
2) Lay O-ring flat along the O-ring groove. Be careful not to
roll or twist O-ring.
3) Gently push O-ring down into the groove until the O-ring is
completely seated into the groove. Do not lube O-ring.
