Sealife Micro 3.0, Инструкция по эксплуатации

Страница: 64 / 84

62
VIII.
Care and Maintenance
• Soak camera in a fresh water tub for about 20 minutes immediately
after underwater use. While holding camera underwater, push
each button a 20 times to rinse out trapped debris and saltwater.
Remove the rubber USB cover to allow fresh water to rinse the
waterproof USB contacts
.
•
Do not directly or indirectly expose the camera to spray-on
sunscreens. Most spray-on sunscreens contain chemicals that
attack the polycarbonate material of the underwater housing,
causing cracks that comprise the waterproof seal.
• Do not use abrasives, chemicals, cleaning solvents or detergents
to clean the UW camera.
•
Dry the camera and USB contact area with a clean towel the fresh
water rinse. Don’t allow water to dry on the lens or LCD window,
which can cause water stains.
•
Make sure camera and USB contacts are perfectly dry before
charging, PC connection or storage.
•
Do not take apart or attempt to service the camera yourself.
Contact your local authorized SeaLife dealer if the camera
becomes damaged and requires service. Opening and tampering