Sealey YK30F.V3 Скачать руководство пользователя страница 4

YK30F.V3  Issue 2 (3) 11/04/22

Original Language Version

© Jack Sealey Limited

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

 01284 757500 

 01284 703534 

 [email protected] 

 www.sealey.co.uk

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to 
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely 
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids 
according to local regulations.

Note

: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior 

notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call 

our technical team on [email protected] or 01284 757505.

Important

: No Liability is accepted for incorrect use of this product.

Warranty

: Guarantee is 24 months from purchase date, proof of which is required for any claim.

Содержание YK30F.V3

Страница 1: ...h the safety valve 8 DO NOT exceed the rated capacity of the press 8 DO NOT apply off centre loads 8 DO NOT allow the workpiece or the press plates to fall from the work table 8 DO NOT get the press wet or use in damp or wet locations or areas where there is condensation 8 DO NOT operate the press when you are tired or under the influence of alcohol drugs or intoxicating medication 8 DO NOT climb ...

Страница 2: ... level the frame using a good quality spirit level Fully tighten all fixings 4 2 8 Remove the load slings and store them in a safe and secure location WARNING Take care and seek assistance from another person when lowering and levelling the frame assembly onto the floor 4 3 ATTACH THE PUMP ASSEMBLY WARNING Seek assistance from another person with this task as the pump assembly is heavy NOTE The pu...

Страница 3: ... or the component Also ensure you have read and understood section 1 Safety Instructions 6 OPERATION 6 1 Check that the release valve on the hydraulic unit is fully closed ready for operating 6 2 Position the bed frame at the required operating height by inserting the bed frame pins into the appropriate holes in the frame 6 3 Position the V block plates or press tools to be used onto the bed frame...

Страница 4: ...pletely unserviceable and requires disposal drain any fluids if applicable into approved containers and dispose of the product and fluids according to local regulations Note It is our policy to continually improve products and as such we reserve the right to alter data specifications and component parts without prior notice Please note that other versions of this product are available If you requi...

Отзывы: