Sealey YK15BP, Руководство пользователя

Страница: 2 / 3

Minimum Height - Ram to Table: ................................ 157mm
nett Weight: ................................................................... 73kg
optional Accessories: .................................................YKPP8
overall Height: ........................................................... 965mm
Ram diameter: .......................................................... Ø43mm
Ram Stroke: ............................................................... 160mm
Table Aperture: ........................................................... 140mm
Type: ....................................................................... Hydraulic
Working Table depth: ................................................. 156mm
Working Table Width: ................................................. 600mm
4. ASSEMBLY
4.0.1. Attach slings around the top cross member, using a suitable hoist or gantry lift the main frame (fig.1.15) out of the transportation crate
into an upright position.
4.0.2. Keep the main frame (fig.1.15) held safely upright. DO NOT allow to fall. Attach base sections (fig.1.11) with supports (fig.1.10) to the
left and right hand posts. only fully tighten the securing nuts and bolts when the base sections (fig.1.11) are square to the main frame.
4.0.3. Attach the hydraulic unit (fig.1.43) to the right hand post of the main frame (fig.1.15) .
4.0.4. Connect the hydraulic hose (fig.1.40) from the hydraulic unit (fig.1.43) to the union on the union seat (fig.1.36) in the top cross
member of the main frame (fig.1.15) .
4.0.5. locate the pressure gauge hole in the union seat (fig.1.36) and remove the plug with a hex key (this may be very tightly secured).
Screw the pressure gauge (fig.1.41) into the union seat (fig.1.36) .
4.0.6. Hold bed frame (fig.1.6) in position with bed frame pins (fig.1.8) and secure with the safety clips (fig.1.7) .
5. INSTALLATION
5.0.1. Securely attach the press to a flat, firm, level surface taking into account
clearance for workpieces.
▲ DANGER! The press is heavy. If it requires moving after assembly or for
relocation, use suitable slings around the top crossbeam, or lift direct with a
forklift with the forks located under the top crossbeam.
5.1. Purge hydraulic system.
Before operating the press, the hydraulic system may require purging in
order to eliminate any air that may have built up during transit.
open the release valve (fig.2) by turning anti-clockwise and pump the
handle several times. Should the system malfunction at any time, repeating
this procedure may resolve the problem.
▲ DANGER! The press is purpose designed to withstand greater loads than
the hydraulic unit can develop. For safety reasons, always ensure the
workpiece is secured on the table to ensure loads that flex will not suddenly
“give” causing danger to operator or damage to component. ensure you
have read and understood chapter 1 safety instructions.
5.2. SETTING THE WORKING TABLE HEIGHT
5.2.1. To set the working table at the desired height it is advisable to obtain
assistance due to the weight of the working table. Remove the pressing
plate/V-blocks from the working table then remove the safety clips and the
pins. Position the working table at the required operating height, insert the
pins into the appropriate holes in the uprights and fit safety clips.
YK15BP Issue 2 PL 11/01/18
Sealey Group , Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
sales@sealey.co.uk www.sealey.co.uk
Page 1 of 1
NOTE : It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT : No liability is accepted for incorrect use of product.
WARRANTY : Guarantee is 12 months from purchase date, proof of which will be required for any claim.
Parts Information:
Hydraulic Press Premier 15tonne Bench
Type
Model No: YK15BP
Item Part No. Description
1 GSM88.S GRUB SCREW M8x8 (SINGLE)
2 YK15FFP.02 SPRING
3 SB-5.6 STEEL BALL 5.6mm
4 YK15BP.04 V-BLOCK
5 YK15FFP.05 SCREW
6 YK15BP.06 BED FRAME
7 YK15BP.07 RETAINING CLIP
8 YK15BP.08 PIN, TABLE SUPPORT 265x19mm
9 YK15BP.09 BOLT
10 YK30FFP.10 SUPPORT
11 YK15FFP.11 BASE SECTION
12 YK15BP.12 WASHER
13 YK15BP.13 LOCK WASHER
14 YK15BP.14 NUT
15 YK15BP.15 FRAME
16 YK15BP.16 BOLT
17 YK15FFP.17 SERRATED SADDLE
18 YK15FFP.18 RAM NUT
19 YK15FFP.19 UNDER PLATE
20 YK15BP.20 SCREW
21 YK30FFP.24 R-PIN
22 YK30FFP.23 SLIDE BLOCK
23 YK15FFP.23 CONNECTING PLATE
Item Part No. Description
24 YK15FFP.24 UPPER ROUND NUT
25 YK15FFP.25 SPRING
26 YK15FFP.26 SCREW
27 HHB10100.S HEX HEAD BOLT M10x100mm SINGLE
28 YK15FFP.28 RAM
29 YK15FFP.29 OIL HOSE (FOR RAM)
30 YK50FFP.51 O-RING
31 YK50FFP.62 JOINT
32 YK50FFP.45 ELBOW FITTING
33 YK15BP.33 NUT
34 YK15BP.34 LOCK WASHER
35 YK15BP.35 WASHER
36 YK15FFP.36 UNION SEAT
37 YK50FFP.56 UNION NUT
38 YK50FFP.57 UNION SCREW
39 YK759FAH.61 NYLON RING
40 YK15BP.40 OIL HOSE (FOR PUMP)
41 YK15FFP.40 PRESSURE GAUGE
42 YK15BP.42 BOLT
43 YK15BP.43 PUMP
44 YK759FAH.54 HANDLE
45 YK50FFP.86 HANDLE GRIP
fig.1
fig.2
YK15BP Issue 2 07/08/18 Original Language Version
© Jack Sealey limited