2. INTRODUCTION & SpECIFICATIONS
A range of pond pumps suitable for creating garden water features such as fountains and waterfalls. They also provide the important
functions of filtration and water circulation which are necessary to maintain healthy plant and fish life. Each pump is supplied with 5
fountain heads (fig.3) and 10m of cable.
3. OpERATING INSTRUCTIONS
WARNING! Ensure that you read, understand and apply the safety instructions in Section 1.
3.1. Start-up.
3.1.1. Place the pump on a flat level surface which is raised from the bottom of the pond. This prevents the pump from clogging too quickly.
3.1.2. You may use the pump lying on its side. You should however, make sure that the motor axis is horizontal, otherwise the shaft will be subject
to increased wear.
3.2.
Cascade Fountain Mode.
3.2.1. When installing the pump in the pond, make sure that the fountain head projects above the water surface. Please refer to
fig 1 and ensure the regulating valve fig 1.1 is set at o° (turned all the way to the right). The delivery heights and diameters in fig 1
correspond to a condition in which the fountain head is placed 50mm above the water surface.
Technical Data.
Model:
Wpp2300
Wpp2650
Wpp3500
Power Consumption:
55W
75W
95W
Max. Head:
2.3mtr
2.7mtr
3.0mtr
Max. flow Rate:
2300ltr/h
2650ltr/h
3500ltr/h
Max. Submersion Depth:
2.3mtr
2.7mtr
3.0mtr
Power Cable:
10mtr
10mtr
10mtr
Max. Temp. of the Pumped fluid:
35°C
35°C
35°C
Input:
230V
230V
230V
Protection Type:
IP68
IP68
IP68
Fig 1
1
2
Refer to Fig 1.
Wpp2300
Wpp2650
Wpp3500
Diameter of 1st stage “C”
1100mm
1200mm
1320mm
Diameter of 2nd stage “B”
800mm
1000mm
1100mm
Delivery head of 1st stage “D”
700mm
900mm
990mm
Delivery of second stage “E”
1100mm
1450mm
1595mm
Max. delivery head “f”
1300mm
1800mm
1980mm
Refer to Fig 1
Wpp2300
Wpp2650
Wpp3500
Distance from pump outlet to fountain head “G” 240-395mm 255-410mm 255-410mm
Distance from pump base to fountain head “H” 365-520mm 380-535mm 380-535mm
3.3
Fountain Heads.
3.3.1. A selection of fountain heads are supplied with the pump (fig 3). Choose the desired style and install onto the outlet pipe.
3.4.
Fountain and Water Spout Connection.
3.4.1. Additional water spectacles can be connected to the water spout connection (fig.1.2) with a hose of 19mm OD .
3.4.2. To open the spout connection, turn the regulating valve (fig 1.1) anticlockwise between 0-90° to adjust the flow between
the spout and the fountain head.
3.5.
Water Spout Only.
3.5.1. Turn the regulating valve all the way anticlockwise to 90°. All the water flow will now be through the water spout.
Fig 2
Original Language Version
WPP2300, WP2650, WPP3500 Issue: 3 - 24/11/09
