© Jack Sealey Limited
Original Language Version
INSTRUCTIONS FOR:
CAMSHAFT LOCKING TOOL - SUBARU
MODEL NO:
VSE5066
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions
and maintained properly, give you years of trouble free performance.
Refer to Instruction
Manual
1. SAFETY
WARNING!
Wear approved eye protection. Wear appropriate Personal Protective Equipment. A full range of Personal Protective Equipment
is available from your Sealey dealer.
WARNING!
Ensure that Health & Safety, Local Authority Regulations and general workshop practice Regulations are adhered to when
using tools.
DO NOT
use tools if damaged.
Maintain tools to ensure that they are in an adequate condition for safe use and optimum performance.
Ensure that a vehicle that has been raised by a jack is adequately supported. Use axle stands.
Wear suitable clothing to avoid snagging.
DO NOT
wear jewellery. Tie back long hair.
Account for all tools, parts and components being used.
DO NOT
leave these in or near the engine. Return tools to suitable storage after
use.
IMPORTANT!
These Instructions are provided as a guide only. Always refer to the vehicle manufactures’ service instructions or a
proprietary manual to establish the correct procedure and data.
WARNING!
The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations. The Operator / user
must apply caution and common sense (good practical sense).
When timing an engine, always prevent the engine from being turned over. Use a notice and/or inhibit the engine.
WARNING!
Incorrect or out of phase camshaft timing can result in contact between the valve head and the piston crown. This will cause
damage to the engine.
2. INTRODUCTION
3. APPLICATIONS
This useful time saving tool is designed to assist with the operation when replacing the timing belt on Subaru 2.0 and 2.5 litre engines. For use
on hexagonal camshaft sprocket fixing bolts.
Make:
Model:
Engine
Codes:
Subaru
Forester
(05-09)
2.0:
EJ204,
EJ205
Forester Turbo (08-13)
2.5: EJ205, EJ205, EJ255, EJ257
Impreza
VSE5066 Issue: 1 - 16/05/16
