2. INTRODUCTION
Fitted with a 60mm high resolution screen and includes controls for light intensity, mirror flip function (to reverse image when using a 45° mirror)
and image rotation. Features waterproof probe pod with IP67 rating. Powered by four AA batteries (supplied).
3. SPECIFICATION
Model No:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VS8196.V3
Camera Diameter: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ø9mm
Field of Vision: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53°
Pod Length: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49mm
Probe Length:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000mm
Adjustable Light Control: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes
Screen Size: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60mm
Screen Resolution: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 960 x 240
Mirror Flip/Rotate Function: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes
AV Out: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes (cable not supplied)
Accessories: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45° Mirror, Magnetic Pick-Up, Hook
Power Source: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 x AA (supplied)
4. ASSEMBLY
4.1.
Batteries
4.1.1. To insert batteries; slide open the battery compartment cover in the base of the display unit handle (fig.2).
4.1.2. Remove the battery carrier, insert 4 x AA batteries (observing correct polarity).
4.1.3. Replace the battery carrier and close the cover.
4.2.
Connecting probes. NOTE:
Ensure that the borescope is switched off before changing probes or accessorie
s.
4.2.1.
Insert the cable connector into the rear of the display unit (do not use excessive force).
4.2.1. When inserted, turn the cable connector collar anticlockwise until connected securely.
4.3.2. To disconnect, turn clockwise to release.
4.3.
Attaching accessories
4.3.1. Hold the accessory against the image head (fig.4), placing the hook in the hole.
4.3.2. Match the slot in the sleeve, then slide the sleeve down over the image head until it covers the hook.
4.4.
Connecting to external monitor
Connect the AV out port to the monitor using a suitable cable (not supplied).
fig.1
fig.2
fig.3
VS8196.V3 Issue: 1 - 30/03/17
Original Language Version
© Jack Sealey Limited
