Original Language Version
© Jack Sealey Limited
4.1.2.
Once the desired depth has been achieved, remove the drill and drill guide. Set the stop
on the stepped drill (fig.2) and drill to the required depth.
4.1.3.
Using a suitable Tap Wrench such as the Sealey AK727, (fig.3) cut a new thread using the M8 x 1.0mm Tap, ensure Tapping and
Cutting Fluid is used and follow normal engineering good practice when creating threads.
Note:
There will be light thread tapping to the bolt hole as the tap makes its way down.
4.1.4.
Once the thread has been created, remove the tap and thoroughly clean and dry
the area, ensuring all swarf has been removed.
4.1.5.
Lightly oil the thread insert fitting tool thread and fully screw the thread insert
onto it.(fig.4) Apply a suitable high strength thread retainer such as
Sealey SCS638S to the thread insert.
4.1.6.
Screw the threaded insert fully into position. Once tightened into position,
unscrew the thread fitting tool. Once the High Strength Thread retainer has had
sufficient time to cure, reassembly can take place.
4.1.7.
For replacement thread inserts please order Sealey VS640RF.
fig.1
fig.2
fig.3
fig.4
fig.5
VS640 | Issue:1 06/01/20
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important
: No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.