Jaguar:
S-Type (99-08), XF (08-09), XJR (97-10), XJ8
(97-10),
XKR (98-09), XK8 (96-09), Sovereign (97-03)
Land Rover:
Discovery III (04-09), Range Rover (05-09),
Range Rover Sport (05-09)
Daimler:
V8 (97-03), Super V8 (97-03)
Engine Codes:
3.2:
AC, KB, KC
3.5:
RB
4.0:
BC, CC, CE, DC, EC, GB, GC, LB,LC, MA, MB,
NB, NC, PA, PB
4.2:
1B, 2B, 3B, 1G, 5G, 9G, HB, HG, SB,TB, PC,
428PS
4.4:
448PN
INSTRUCTIONS FOR:
PETROL ENGINE SETTING/LOCKING KIT -
JAGUAR/LAND ROVER/DAIMLER - CHAIN DRIVE
MODEL No:
VS4980
1. SAFETY
2. CONTENTS
3. APPLICATIONS
WARNING!
Ensure Health and Safety, local authority and
general workshop practice regulations are adhered to when
using tools.
DO NOT
use tools if damaged.
Maintain tools in good and clean condition for best and safest
performance.
Ensure that a vehicle which has been jacked up is adequately
supported with axle stands.
Wear approved eye protection. A full range of personal safety
equipment is available from your Sealey dealer.
Wear suitable clothing to avoid snagging.
DO NOT
wear
jewellery and tie back long hair.
DO NOT
attempt to start engine or move vehicle whilst in gear
with locking devices fitted.
Always display warning notification on steering wheel when
locking engine components.
Account for all tools, locking bolts, pins and parts being used
and
do not
leave them in or near the engine.
WARNING!
Incorrect or out of phase camshaft timing can result
in contact between valve head and piston crown causing
damage to the engine.
IMPORTANT: These instructions are provided as a guide only
Always refer to the vehicle manufacturer’s service instructions,
or a proprietary manual, to establish the current procedure and
data.
VS4980
Issue No: 3(SP) 08/07/15
VS4980
Associated Tool
VS4985
Original Language Version
© Jack Sealey Limited
Kit contains specialised tools required for timing chain setting and lock-
ing on Jaguar, Land Rover and Daimler 3.2, 3.5, 4.0, 4.2, 4.4 V8 AJ26/
AJ27/AJ28/AJ34 series petrol engines. Supplied with comprehensive
instructions and carry-case.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions
and maintained properly, give you years of trouble free performance.
Refer to
Instruction Manual
Wear Eye
Protection
