Sealey TP95 Скачать руководство пользователя страница 4

5.1.

Maintenance, service and repair should only be carried out by qualified persons.

5.2.

Clean the pump silencer at least once a month to remove oil residue. Remove it from the pump housing and place it in a detergent
solution for 2 hours. Dry it with compressed air and place it back in the pump housing.

5.3.

Check the condition of the transfer hoses. Make sure that they are intact and undamaged, without cracks, holes or leaks. If they are
damaged or they leak, replace them.

5.4.

Check the condition of the teflon gaskets and the ‘fishbone’ connections. Be sure that they are undamaged and can maintain a
perfect seal. Replace them with original spare parts if they are damaged or not working correctly.

5.5.

Periodically check the earth strap terminals for tightness and that the wire and clamps are in good order.

5. MAINTENANCE

E

F

Declaration of Conformity

We, the sole importer into the UK, declare that the product listed below is in conformity with the following standards and directives.

The construction file for these products is held by the Manufacturer
and may be inspected on request by contacting Jack Sealey Ltd

For Jack Sealey Ltd.  
Sole importer into the UK of Sealey Power Products

Pneumatic Fuel Tank Drainer Model No: TP95

89/392/EEC

Machinery Directive (1992 SI No. 3073)

Signed by Tim Thompson

1st March 2007

NOTE:

It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts

without prior notice.

IMPORTANT: 

No responsibility is accepted for incorrect use of this product. 

WARRANTY: 

Guarantee is 12 months from purchase date. Proof of purchase will be required for any claim. 

INFORMATION: 

Please call us for a copy of our latest catalogue

01284 757500

01284 703534

[email protected]

Sole UK Distributor

Sealey Group,

Bury St. Edmunds, Suffolk.

www.sealey.co.uk

Web

email

Содержание TP95

Страница 1: ... container Do not use this tool for anything other than its intended purpose The TP95 is only to be used for pumping fuel from diesel or petrol fed vehicles Do not work on a fuel tank or remove a sender unit before draining the fuel Do not use an open flame or smoke anywhere near the tool or around stored fuel Do not drain fuel into open topped containers such as buckets and watering cans Do not d...

Страница 2: ...the pump 3 3 1 Attach drain hose to the pump inlet A with a spanner 3 3 2 Pass the drain hose through the upper table hole and place the pump into its housing B 3 3 3 Secure the pump from below with the spacer 3 3 4 Attach the suction hose to the bottom of the pump 3 4 Earth strap connection 3 4 1 Pass bolt through designated TP95 table hole X 3 4 2 Fit locking washer nut three strap connectors 2n...

Страница 3: ...ntial fuel vapour and the other end of the strap to a suitable earthing point Ensure the fuel container is also connected to the earth strap if neccesary scrape away a small amount of paint from the container to improve the earth connection 4 4 Transferring fuel directly from the tank 4 4 1 Access to the tank may be gained from the boot through a porthole closed by a guard or a safety device if th...

Страница 4: ...E E F Declaration of Conformity We the sole importer into the UK declare that the product listed below is in conformity with the following standards and directives The construction file for these products is held by the Manufacturer and may be inspected on request by contacting Jack Sealey Ltd For Jack Sealey Ltd Sole importer into the UK of Sealey Power Products Pneumatic Fuel Tank Drainer Model ...

Отзывы: