5. operatIon
5.1.
Remove the pump from the holder (fig.3), which may be hooked onto the handle of the jerry can using the hanging hook provided
(fig.4).
5.2.
lower the pump stem into the jerry can until it rests on the base of the can.
5.3.
Place the delivery nozzle into the receiving container; the nozzle may be either wedged or clipped in place using the attached
moulded spigot, (see fig.5.1)
5.4.
To start the pump, slide the switch (fig 5.2).
5.5.
The pump will switch off automatically when the dispensed liquid reaches the stop line (fig.5.3) or manually at any point before
then.
5.6.
The pump is fitted with an anti-vacuum valve to prevent syphoning.
8
do not
leave the pump unattended whilst it is running
Sealey Group, Kempson Way, Suffolk business park, bury St edmunds, Suffolk. Ip32 7ar
01284 757500
01284 703534
www.sealey.co.uk
envIronment protectIon
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Weee reGulatIonS
dispose of this product at the end of its working life in compliance with the eU directive on Waste electrical and electronic equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
battery removal See SectIon 4
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack
Sealey Ltd Batteries Producer Registration Number (BPRN) is BPRN00705.
note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important
: no liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Original Language Version
© Jack Sealey limited
T
P80 Issue 3 (2) 05/03/19
fig.4
fig.5
fig.3
