jerry can pump battery operated
Model no:
tp80
thank you for purchasing a Sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
1. Safety
WarnInG!
This pump must be used in accordance with Health & Safety, government, local authority, and water authority rules and
regulations.
9
Familiarise yourself with application and limitations, as well as the potential hazards peculiar to the pump.
9
Maintain the
pump in good condition. Keep the pump clean.
9
Replace or repair damaged parts (use an authorised service agent).
Use genuine parts only. Non authorised parts may be dangerous
and will invalidate the warranty.
8
do not
operate the pump if any parts are damaged or missing as this may cause failure and/or personal injury.
8
do not
use the pump for any purpose other than for which it is designed.
8
do not
operate pump out of liquid. The pump pick up area must be completely submerged during operation.
8
do not
operate the pump during freezing temperatures.
do not
leave the pump in liquid that may freeze.
8
do not
carry the pump by its outlet pipe.
9
When not in use rinse pump, drain out any liquid and store in a frost free, safe location.
WarnInG! do not
allow uncontrolled discharge of contaminated water/harmful chemicals thus polluting the environment.
2. IntroductIon
e
asily transfers fluid from 5, 10 & 20ltr Sealey jerry cans. Compatible for use with diesel, kerosene and water. Hook storage design allows
pump to attach onto jerry can and features a height adjustable control to accommodate different sized containers. Fitted with auto-stop feature
to prevent overfilling. Suitable for the full range of Sealey jerry cans and other compatible brands. Operated by an electric motor powered by 2
x AA batteries (not included).
3. SpecIfIcatIon
model no:
.....................................................................
tp80
Hose length: ..............................................................
700mm
Flow Rate: .................................................................. 9ltr/min
Battery: .................................................
2 x AA (not included)
Weight .........................................................................
0.28kg
4. battery fIttInG
4.1.
Slide battery compartment open as in fig.1.
4.2.
Insert 2 x AA batteries as in fig.2, observing the correct polarity.
4.3.
Replace sliding cover.
4.4.
Removal of the batteries is the reverse of 4.1 to 4.3.
T
P80 Issue 3 (2) 05/03/19
Original Language Version
© Jack Sealey limited
Refer to
instructions
fig.1
fig.2
