Environmental Protection.
Recycle unwanted materials instead of disposing of them as waste.
All tools, accessories and packaging should be sorted, taken to a recycle centre and
disposed of in a manner which is compatible with the environment.
When the product is no longer required, it must be disposed of in an environmentally
protective way.
Battery Removal.
WARNING!
To avoid electric shock, disconnect the test leads from any
source of voltage before removing the battery door.
Disconnect the test leads from the meter.
Open the battery cover by loosening the two cover screws using a Phillips
head screwdriver (fig.A below).
Lift the battery from the meter and unclip from the battery socket.
Replace the battery cover back in place. Secure with the screws.
WARNING!
To avoid electric shock, do not operate the meter until the
battery cover is in place and fastened securely.
Dispose of batteries according to local authority guidelines
.
TM100 Issue No:2(I) - 18/06/14
Original Language Version
REMOVE SCREWS
TO ACCESS
BATTERY AND
FUSES
fig.A
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required
to inform potential purchasers of products containing batteries (as defined within these
regulations), that they are registered with Valpak’s registered compliance scheme.
Jack Sealey Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and
component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your
full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,IP32 7AR
www.sealey.co.uk
© Jack Sealey Limited
