4.1.
TRAILER WIRING CODES (N-TYPE)
4.1.1.
“N” Type
Pin 1
Yellow Left hand direction indicator lamp
P
in 2
Blue
Rear fog lamp/lamps
P
in 3
White
Common return (earth)
P
in 4
Green
Right hand direction indicator lamp
P
in 5
Brown Right hand tail lamp/ Rear registration lamp
Pin 6
Red
Rear stop lamps
P
in 7
Black
Left hand tail lamp/ Rear registration lamp
4.2.
Plug the transmitter into the socket on the vehicle.
4.3.
Turn on both the light units. The left hand green light bar (on the battery indicator) will flash when the unit has been switched on.
4.4.
Start the vehicle and turn on the hazard lights.
5. OPERATION
WARNING!
When the red light on the low battery indicator is flashing charge the light.
5.1.
PAIRING THE DEVICE
5.1.1.
Hold down the pairing button for 5 seconds. The right hand orange light (on the battery indicator) will illuminate when pairing is in
progress. The light will go out when pairing is complete.
NOTE:
Always charge the lights to full before any long distance travel.
fig.1
fig.2
fig.3
TB18LEDW Issue 1 23/06/2021
Original Language Version
© Jack Sealey Limited
